Recording
This section explains how to record the input source and |
| Recording from Different AV Sources | |||||||||
how to record audio and video from separate sources. |
|
|
|
|
|
|
|
|
|
|
|
| You can overdub audio onto your video recordings by | ||||||||||
Notes: |
| ||||||||||
| simultaneously recording audio and video from two | ||||||||||
• The surround sound and DSP listening modes cannot |
| ||||||||||
| separate sources. This is possible because only the audio | ||||||||||
be recorded. |
| ||||||||||
| source is switched when an | ||||||||||
• |
| ||||||||||
| such as TV/TAPE or CD, is selected, the video source | ||||||||||
• Sources connected to a digital input cannot be |
| ||||||||||
| remains the same. | ||||||||||
recorded. Only analog inputs can be recorded. |
| ||||||||||
| In the following example, audio from the CD player | ||||||||||
• DTS signals will be recorded as noise, so don’t |
| ||||||||||
| connected to the CD IN and video from the camcorder | ||||||||||
attempt analog recording of DTS CDs or LDs. |
| ||||||||||
| connected to the AUX INPUT VIDEO jack are recorded | ||||||||||
|
| ||||||||||
Recording the Input Source |
| by the VCR connected to the VCR/DVR OUT jacks. | |||||||||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
Audio sources can be recorded to a recorder (e.g., |
|
|
|
|
|
|
|
|
|
|
|
cassette deck, CDR, MD) connected to the TV/TAPE |
|
|
|
|
|
|
|
|
|
|
|
OUT jack. Video sources can be recorded to a video |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
recorder (e.g., VCR, DVR) connected to the VCR/DVR |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
OUT jacks. See pages 18 to 31 for hookup information. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 | Use the input selector buttons to |
| |
| select the source that you want |
| to record. |
| You can watch the source while |
| recording it. The AV receiver’s |
| MASTER VOLUME control has no |
| effect on recording. |
2 | On your recorder, start |
| |
| recording. |
3 | On the source component, start |
| |
| playback. |
Note:
If you select a different input source during recording, that input source will be recorded instead.
Camcorder
video signal audio signal
CD player | VCR |
1 | Prepare the camcorder and CD player for |
| playback. |
|
|
2 | Prepare the VCR for recording. |
|
|
3 | Press the [AUX] input selector button. |
|
|
4 | Press the [CD] input selector button. |
| This selects the CD player as the audio source but |
| leaves the camcorder as the video source. |
|
|
5 | Start recording on the VCR, then start |
| playback on the camcorder and CD player. |
Video from the camcorder and audio from the CD player are recorded by the VCR.
48