Mio R-4 Setup

Mio R-4 Setup

Inserting or Replacing the Lithium-Ion Battery Into the Mio R-4

To install your lithium-ion battery into the Mio R-4:

1.Flip and turn the Mio R-4 so that the buttons are facing away from you and the device is upside down.

2.Holding the device in both hands, place your thumbs on the battery door and slide the battery door free. The battery door should slide toward the bottom end of the device.

3.Connect the terminal end of the Lithium Ion battery to the port shown in FIG. 2. It may be necessary to use a thin, blunt non-conductive object to seat the battery connector fully within its port.

Programming Port (USB)

Lithium-Ion Battery

Rechargeable

Battery Port

Connection

Correct path for battery wires and connector

Rear view -

battery compartment

FIG. 2 Rechargeable Battery Port on The Mio Remote

Make sure that the battery wires run alongside the battery in the compartment as shown in FIG. 2. Otherwise, the wires may be damaged or the battery door may not close properly.

4.Place the battery door back on the device, and slide the door upwards to lock it in place.

Mio Modero R-4

5

 

 

Page 11
Image 11
AMX Mio Modero R-4 manual Mio R-4 Setup