AMX Mio Modero R-4 manual Ppof, Ppog, Ppon

Programming the Mio R-4

Page Commands (Cont.)

PPOF	Deactivate a specific popup page on either a specified page or the current page. If the
Deactivate a	page name is empty, the current page is used (see example 2). If the popup page is part of
	a group, the whole group is deactivated. This command works in the same way as the
popup page
	'Hide Popup' command in TPDesign4.
	Syntax:
	SEND_COMMAND <DEV>,"'PPOF-<popup page name>;<page name>'"
	Variables:
	• popup page name = 1 - 50 ASCII characters. Name of the popup page.
	• page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Device,"'PPOF-Popup1;Main'"
	Deactivates the popup page 'Popup1' on the Main page.
	Example 2:
	SEND_COMMAND Device,"'PPOF-Popup1'"
	Deactivates the popup page 'Popup1' on the current page.
PPOG	Toggle a specific popup page on either a specified page or the current page. If the page
Toggle a popup	name is empty, the current page is used (see example 2). Toggling refers to the activating/
	deactivating (On/Off) of a popup page. This command works in the same way as the
page.
	'Toggle Popup' command in TPDesign4.
	Syntax:
	SEND_COMMAND <DEV>,"'PPOG-<popup page name>;<page name>'"
	Variables:
	• popup page name = 1 - 50 ASCII characters. Name of the popup page.
	• page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Device,"'PPOG-Popup1;Main'"
	Toggles the popup page 'Popup1' on the Main page from one state to another (On/Off).
	Example 2:
	SEND_COMMAND Device,"'PPOG-Popup1'"
	Toggles the popup page 'Popup1' on the current page from one state to another (On/Off).
PPON	Activate a specific popup page to launch on either a specified page or the current page. If
Activate a popup	the page name is empty, the current page is used (see example 2). If the popup page is
	already On, do not re-draw it. This command works in the same way as the 'Show Popup'
page to launch.
	command in TPDesign4.
	Syntax:
	SEND_COMMAND <DEV>,"'PPON-<popup page name>;<page name>'"
	Variable:
	• popup page name = 1 - 50 ASCII characters. Name of the popup page.
	• page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Device,"'PPON-Popup1;Main'"
	Activates the popup page 'Popup1' on the Main page.
	Example 2:
	SEND_COMMAND Device,"'PPON-Popup1'"
	Activates the popup page 'Popup1' on the current page.

46 Mio Modero R-4