AMX Mio Modero R-4 manual Bat, Bau, Bcb

Programming the Mio R-4

"^" Button Commands (Cont.)

^BAT	Append non-unicode text.
Append	Syntax:
non-unicode text	"'^BAT-<vt addr range>,<button states range>,<new text>'"
	Variable:
	• variable text address range = 1 - 4000.
	• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	• new text = 1 - 50 ASCII characters.
	Example:
	SEND_COMMAND Device,"'^BAT-520,1,Enter City'"
	Appends the text 'Enter City' to the button’s OFF state.
^BAU	Append unicode text. Same format as ^UNI.
Append	Syntax:
unicode text	"'^BAU-<vt addr range>,<button states range>,<unicode text>'"
	Variable:
	• variable text address range = 1 - 4000.
	• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	• unicode text = 1 - 50 ASCII characters. Unicode characters must be entered in Hex
	format.
	Example:
	SEND_COMMAND Device,"'^BAU-520,1,00770062'"
	Appends Unicode text '00770062' to the button’s OFF state.
^BCB	Set the border color to the specified color only if the specified border color is not the same
Set the border	as the current color.
color to the	Note: Color can be assigned by color name (without spaces), number or R,G,B value
specified color	(RRGGBB or RRGGBBAA).
	Syntax:
	"'^BCB-<vt addr range>,<button states range>,<color value>'"
	Variable:
	• variable text address range = 1 - 4000.
	• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	• color value = Refer to theRGB Values for all 88 Basic Colors table on page 35 for more
	information.
	Example:
	SEND_COMMAND Device,"'^BCB-500.504&510,1,12'"
	Sets the Off state border color to 12 (Yellow). Colors can be set by Color Numbers, Color
	name, R,G,B,alpha colors (RRGGBBAA) and R, G & B colors values (RRGGBB).
	Refer to theRGB Values for all 88 Basic Colors table on page 35.

50 Mio Modero R-4