AMX Mio Modero R-4 manual SENDCOMMANDs, Commands, @Apg, @Cpg

Programming the Mio R-4

SEND_COMMANDs

Below is a list of SEND_COMMANDs accepted by the Mio R-4 from NetLinx masters. To use these commands, establish a Telnet session from the PC to the NetLinx master. Additionally, you could use NetLinx Studio 2.4 or the master’s web page to send the commands.

All text is based on a Unicode index.

Page Commands

Page Commands are used in the NetLinx Programming Language and are case insensitive.

Page Commands

PAGE	Flips to a page with a specified page name. If the page is currently active, it will not redraw
Flip to a specified	the page.
page	Syntax:
	"'PAGE-<page name>'"
	Variables:
	• page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Device,"'PAGE-Page1'"
	Flips to page1.
@APG	Add a specific popup page to a specified popup group. Add the popup page to a group if it
Add a popup page	does not already exist. If the new popup is added to a group which has a popup displayed
to a popup group	on the current page along with the new pop-up, the displayed popup will be hidden and
	the new popup will be displayed.
	Syntax:
	SEND_COMMAND <DEV>,"'@APG-<popup page name>;<popup group name>'"
	Variables:
	• popup page name = 1 - 50 ASCII characters. Name of the popup page.
	• popup group name = 1 - 50 ASCII characters. Name of the popup group.
	Example:
	SEND_COMMAND Device,"'@APG-Popup1;Group1'"
	Adds the popup page 'Popup1' to the popup group 'Group1'.
@CPG	Clear all popup pages from a specified popup group.
Clear all popup	Syntax:
pages from a	SEND_COMMAND <DEV>,"'@CPG-<popup group name>'"
popup group
	Variable:
	• popup group name = 1 - 50 ASCII characters. Name of the popup group.
	Example:
	SEND_COMMAND Device,"'@CPG-Group1'"
	Clears all popup pages from the popup group 'Group1'.

Mio Modero R-4 41