AMX Mio Modero R-4 manual Bmc, Sendcommand Device,BMC-150,1,1,315,1,%BR%FT%TX%BM%IC%CF%CT

Programming the Mio R-4

"^" Button Commands (Cont.)

^BMC

Copy attributes of the source button to all the destination buttons.

Copy attributes of the source button to all the destination buttons.

Note that the source is a single button state. Each state must be copied as a separate command. The <codes> section represents what attributes will be copied. All codes are 2 char pairs that can be separated by comma, space, percent or just ran together.

Syntax:

"'^BMC-<vt addr range>,<button states range>,<source port>,<source address>,<source state>,<codes>'"

Variable:

•variable text address range = 1 - 4000.

•button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons

1= Off state and 2 = On state).

•source port = 1 - 100.

•source address = 1 - 4000.

•source state = 1 - 256. codes:

BM - Picture/Bitmap BR - Border

CB - Border Color CF - Fill Color CT - Text Color

EC - Text effect color EF - Text effect

FT - Font IC - Icon

JB - Bitmap alignment JI - Icon alignment JT - Text alignment

LN - Lines of video removed OP - Opacity

TX - Text

WW - Word wrap on/off

Example:

SEND_COMMAND Device,"'^BMC-425,1,1,500,1,BR'"

or

SEND_COMMAND Device,"'^BMC-425,1,1,500,1,%BR'"

Copies the OFF state border of button with a variable text address of 500 onto the OFF state border of button with a variable text address of 425.

Example 2:

SEND_COMMAND Device,"'^BMC-150,1,1,315,1,%BR%FT%TX%BM%IC%CF%CT'"

Copies the OFF state border, font, Text, bitmap, icon, fill color and text color of the button with a variable text address of 315 onto the OFF state border, font, Text, bitmap, icon, fill color and text color of the button with a variable text address of 150.

Mio Modero R-4 53