AMX Mio Modero R-4 manual Brd, Bsf, Bsm, Bsp

	Programming the Mio R-4
"^" Button Commands (Cont.)
^BRD	Set the border of a button state/states only if the specified border is not the same as the
Set the border of	current border. The border names are available through the TPDesign4 border-name
	drop-down list.
a button state/
states	Syntax:
	"'^BRD-<vt addr range>,<button states range>,<border name>'"
	Variable:
	• variable text address range = 1 - 4000.
	• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	• border name = Refer toBorder Styles by Numbers table on page 38.
	Example:
	SEND_COMMAND Device,"'^BRD-500.504&510.515,1&2,Quad Line'"
	Sets the border by name (Quad Line) to those buttons with the variable text range of
	500-504 & 510-515.
	Refer to theTPD4 Border Styles by Name table on page 38.
^BSF	Set the focus to the text area.
Set the focus to	Note: Select one button at a time (single variable text address). Do not assign a variable
the text area	text address range to set focus to multiple buttons. Only one variable text address can be
	in focus at a time.
	Syntax:
	"'^BSF-<vt addr range>,<selection value>'"
	Variable:
	• variable text address range = 1 - 4000.
	• selection value = Unselect = 0 and select = 1.
	Example:
	SEND_COMMAND Device,"'^BSF-500,1'"
	Sets the focus to the text area of the button.
^BSM	This command causes the text areas to send their text as strings to the NetLinx Master.
Submit text for	Syntax:
text area buttons.	"'^BSM-<vt addr range>'"
	Variable:
	• variable text address range = 1 - 4000.
	Example:
	SEND_COMMAND Device,"'^BSM-500'"
	Submits the text of the text area button.
^BSP	Set the button size and its position on the page.
Set the button	Syntax:
size and position	"'^BSP-<vt addr range>,<left>,<top>,<right>,<bottom>'"
	Variable:
	• variable text address range = 1 - 4000.
	• left = left side of page.
	• top = top of page.
	• right = right side of page.
	• bottom = bottom of page.
	Example:
	SEND_COMMAND Device,"'^BSP-530,left,top'"
	Sets the button with variable text 530 in the left side top of page.

Mio Modero R-4 57