USER PARAMETERS
BASS
The “bass” control allows the sound to be adjusted on the lower frequency range. Using the volume bar as an indicator, the central position shows the default position. Moving the indicator to the left side lowers the bass, reducing the volume of the low frequency sound. Moving the indicator to the right side increases the bass, increasing the volume of the low frequency sound.
The settings for this control can be adjusted from
TREBLE
The “treble” control allows the sound to be adjusted on the higher frequency range. Using the volume bar as an indicator, the central position shows the default position. Moving the indicator to the left side lowers the treble, reducing the volume of the high frequency sound. Moving the indicator to the right side increases the treble, increasing the volume of the high frequency sound.
The settings for this control can be adjusted from
BALANCE
The “balance” control allows the sound to be adjusted from the right or left channel. Using the volume bar as an indicator, the central position shows the default position where both left and right channel audio can be played. Moving the indicator to the left side shifts the audio to the left channel only. Moving the indicator to the right side shifts the audio to the right channel only.
The settings for this control can be adjusted from
DRC
The "DRC" control stands for ‘dynamic range compression’. This mode sets limiter thresholds at different volumes allowing a nighttime listening mode that provides a reduction in the dynamic range regardless of the volume level.
The settings for this control can be adjusted from ON to OFF only.
LOUDNESS
The "loudness" control is intended to make audio sound more natural when played at lower volume. The control alters the frequency response curve to correspond to the natural characteristics off the ear.
The settings for this control can be adjusted from ON to OFF only.
- 18 -
