STEP 3
Select the type of device of source component you wish to control.
Press “Next” to continue.
STEP 4
A button layout for the respective device type chosen will appear.
From these template files, you can select from an assortment of colors schemes and styles.
Press “Next” to continue.
STEP 5
Now the IR command group can be verified. With an XTR39 plugged into the USB port, direct the front end towards the source component.
Press “TEST” and verify the source component either turns on or turns off.
Move down the command group list and select a new IR command group if the source component does not turn on or turn off. Repeat until source component can be controlled. You have now determined the correct IR command group.
Press “Next” to continue.
- 4 -
