Jazz 300.book Page 24 Thursday, February 28, 2002 11:36 AM

Connecting to an External Battery

5. Repeat steps 2 and 3.

WARNING: Sparking and Explosion

Do not remove the jump-start cables from the jumper cable port when the positive and negative clips are connected to the terminals of the external battery. Removing the jump-start cable from the jumper-cable port while they are connected to the vehicle’s battery terminals will disable the jump-start safety feature and could result in sparking or explosion.

To disconnect the jump-start cables from an external battery and from the Jazz PP 300 C:

1.To disconnect the Jazz PP 300 C from the external battery when the external battery is discharged or no longer needed, remove the red positive (+) clip, and then remove the black negative (–) clip.

2.Remove the jump-start cables from the Jumper Cable Port.

3.Recharge the Jazz PP 300 C as soon as possible after use.

24