Jazz 300.book Page 33 Thursday, February 28, 2002 11:36 AM

Replacing the Fluorescent Tubes

Make sure the positive battery terminal is next to the red positive (+) internal cable and the black negative terminal is next to the black negative (–) internal cable.

5.Securely fasten the bolt, washer, and nut that holds the red positive (+) cable to the positive (+) battery terminal and the black negative (–) cable to the negative (–) battery terminal.

6.Do not overtighten the nut and bolt.

Consult the battery manufacturer for torque specifications.

7.Replace the compressor unit and the four fasteners.

8.Dispose of the old battery in an environmentally responsible manner.

Replacing the Fluorescent Tubes

To replace a fluorescent tube:

1.Turn the light switch off.

2.Remove the clear cover by grasping it on each side at the top and pulling the top of the cover away from the unit.

3.Gently grasp the fluorescent tube and rotate ¼ turn to remove it.

4.Insert the replacement tube and rotate ¼ turn to lock the tube in place.

5.Reattach the clear cover.

33