Jazz 300.book Page 32 Thursday, February 28, 2002 11:36 AM

Replacing the Internal Battery

Before attempting to replace the internal battery, make sure that:

•You disconnect any charging cables, 12 volt DC appliances, or AC appliances from the Jazz PP 300 C.

•You turn off the AC Outlet On/Off switch and turn off the fluorescent light switch.

•You remove the jump-start cables.

WARNING

If you do not know how to safely remove and install batteries, have this task performed by a qualified service technician.

WARNING

When installing the replacement battery, make sure the battery polarity is correct. Reverse polarity will damage the Jazz PP 300 C and could cause serious injury.

To replace the battery:

1.Place the Jazz PP 300 C upright on a stable and level surface.

2.Unscrew the four fasteners that hold the compressor unit on the back of Jazz PP 300 C. Place the fasteners in the cover for safe keeping.

3.Disconnect the wires on the battery only.

Important: Do not disconnect the wires on the main frame of the Jazz PP 300 C.

4.After removing the old battery, position the new battery close to the back of the Jazz PP 300 C.

32