Using the Radio: XPower Powerpack 400R
CAUTION
The XPower Powerpack cannot be used to inflate large capacity inflatables such as float tubes, large air mattresses, and inflatable boats. These types of products require extended inflating times which may damage the compressor.
To inflate small sports equipment:
1.Place the valve connector fully on or into the valve receptacle on the item. Go to Step 4.
OR
If necessary, use a supplied nozzle adaptor.
2.Choose the appropriate nozzle adaptor, insert the nozzle adaptor into the valve stem and close the thumb latch.
3.Insert nozzle adaptor into the valve receptacle of the item.
4.Turn the compressor on and inflate to appropriate pressure.
WARNING: Fire hazard
Allow the compressor to cool down for 10 minutes after each 10 minutes of continuous operation.
5.Turn the compressor OFF before removing nozzle adaptor from valve stem.
6.Remove nozzle adaptor from valve connector and store in storage compartment.
Note: Leave the thumb latch in the open position for storing to relieve pressure on the internal mechanism.
Using the Radio: XPower Powerpack 400R
For information about operating the radio, see page
