Maintenance
•Turn off the AC Outlet ON/OFF switch and turn off the light switch.
•Remove the
WARNING
If you do not know how to safely remove and install batteries, have this task performed by a qualified service technician.
WARNING: Fire hazard
When installing the replacement battery, make sure the battery polarity is correct. Reverse polarity will damage the XPower Powerpack and could cause serious injury.
To replace the battery:
1.Place the XPower Powerpack upright on a stable, level surface.
2.On the XPower Powerpack, unscrew the four fasteners on the battery cover. Place the fasteners in the cover for safe keeping.
Fasteners
3.Disconnect the wires on the battery only.
4.After removing the old battery, position the new battery close to the back of the XPower Powerpack.
Make sure the positive battery terminal is next to the red positive (+) internal cable and the black negative terminal is next to the black negative
