Operation | Xantrex Technology 600HD instruction

3 Operation

Chapter 3 explains how to operate the XPower Powerpack 600HD efficiently. This chapter covers:

•Recharging the XPower Powerpack for first time use

•Using the built-in light

•Operating AC appliances and 12 V DC appliances

•Jump-starting a vehicle’s engine

•Connecting to an external battery for additional run time.

Attention: Charge Before Use

Charge the XPower Powerpack for at least 48 hours immediately after purchase. Recharge after each use and once every three months. See “Recharging the XPower Powerpack 600HD Battery” on page 26.

Failure to follow these instructions will void the product warranty.

Operating Conditions and Guidelines

CAUTION

Read all operating instructions before operating the XPower

Powerpack.

CAUTION

Do not use the XPower Powerpack to operate any AC appliances or 12 V DC appliances while recharging with the AC Charger. The AC Charger may fail if AC appliances or 12 V DC appliances are operated while the AC Charger is connected.

CAUTION

The XPower Powerpack is not intended for use as a UPS (Uninterruptible Power Supply).

11

Image 21

Xantrex Technology 600HD manual Operation, Operating Conditions and Guidelines

Contents

Owner’s Guide XPower Powerpack 600HD Date and Revision Conventions Used Purpose Related Information Important Safety Instructions Safety Precautions When Working With Batteries Precautions for Using Rechargeable Appliances Contents Maintenance TroubleshootingSpecifications Introduction About the XPower Powerpack 600HDComprehensive Protection Automatic Overload Jump-Start Cables’ Safety Feature Low Battery Protection Materials List Features Front Panel Features XPower Powerpack 600HD FeaturesFeature Description Front Panel Detail Control Panel Operation Required How to Condition Required Action Charging Status Radio and Clock Features AM/FM Radio with Digital Alarm Clock Radio and Clock Operation Left Side View DC Power Socket can Detachable heavy-duty jump-start cables Accessories Operating Conditions and Guidelines Operation Choosing a Location Dry Cool Ventilated Safe Protected from battery gases Using XPower Powerpack 600HD for the First Time Recharging with the AC ChargerTo recharge with the AC Charger Using the Light Operating AC AppliancesUnderstanding AC Appliances Run Time on Typical AC Appliances AC-powered Products Watts a Run time hours b Trouble Appliances To operate an AC appliance Operating an AC Appliance DC Appliance Watts a Run Time Hours b Operating 12 V DC Appliances To operate a 12 V DC appliance To jump-start a vehicle or boat engine Jump-Starting a Vehicle’s Engine Jump-Starting a Vehicle’s Engine Connecting to an External Battery Using the RadioPower Draw Listening to the AM Band Connecting to an External Battery Connecting to an External Battery Battery Maintenance Maintenance Function button Recharging the XPower Powerpack 600HD Battery Recharging with the AC Charger Recharging with the DC Charging Cable Recharging with a Generator’s Regulated 12 V DC Outlet Recharging From a Solar Panel To wire the coaxial DC connector Replacing the External Fuse Replacing the Incandescent LightTo replace the light bulb To replace the external fuse Recycling Common Problems TroubleshootingBuzz in Audio Equipment Television Interference Problem Possible Cause Solution Troubleshooting Reference Green Charging Status light is Charging Green Voltage at the AC Use AC wall outlet that supplies Page Specifications Electrical SpecificationsDC Section Internal Battery Charging Controller System AC Power Section Physical Specifications AccessoriesRadio Page Warranty Warranty and Return Information Warranty and Return Disclaimer Return Material Authorization PolicyProduct Exclusions Return Procedure Out of Warranty Service Information About Your System