Xantrex Technology 600HD manual Operating an AC Appliance, To operate an AC appliance

Operating AC Appliances

Operating an AC Appliance

Before operating your AC appliance, ensure that the battery of the XPower Powerpack is fully charged. See “Recharging with the AC Charger” on page 13 for details.

To operate an AC appliance:

1.Turn the AC outlet ON/OFF switch to the ON position.

The switch illuminates to indicate AC power is available at the AC outlets.

2.Plug the AC appliance into one of the AC outlets and turn the appliance on. XPower Powerpack will operate most devices rated up to 480 W.

3.Recharge the XPower Powerpack as soon as possible after each use.

When using the XPower Powerpack to operate an AC appliance and the low battery warning sounds, the warning gives you time to shut your AC appliance off before loss of AC power.

If you ignore the warning, the XPower Powerpack automatically turns off a few minutes later to prevent battery damage.

In the event of an overload, low battery voltage or overheating, the XPower Powerpack automatically shuts down.

975-0213-01-01 17