Xantrex Technology 800 Recharging with the AC Charger, Recharging the XPower Powerpack Battery

Recharging the XPower Powerpack Battery

Recharging the XPower Powerpack Battery

To check the XPower Powerpack’s charge level, press the Battery Level button.

Note: The XPower Powerpack Battery Level LEDs are only accurate when the XPower Powerpack has been disconnected from all appliances and all charging sources for 15 minutes.

You can recharge the battery using:

•the fully automatic “plug-in-and-forget” AC Charger.

•the DC Charging Cable to recharge from your vehicle as you drive.

•a generator equipped with a regulated 12 V battery charging outlet.

•a solar panel.

Recharging with the AC Charger

Recharging with the AC Charger is a true “plug-in-and- forget” charging method.

CAUTION

Do not operate AC or DC appliances while the XPower Powerpack is being recharged with the AC Charger.

The AC Charger may be permanently damaged if AC appliances or 12 V DC appliances are operated while the AC Charger is connected.

To recharge with the AC Charger:

1.Disconnect any 12 V DC appliance and turn the light switch to OFF.

2.Turn the AC Power On/Off Switch to OFF.

3.Plug the AC Charger into a standard AC wall outlet.

4.Insert the AC Charger cable end into the AC Charger Input Socket located under the red boosting clamp.

26