Manuals / Xantrex Technology / Lawn and Garden / Portable Generator

Xantrex Technology 400, 800 Recycling, Replacing the Built-in Light, To replace the light bulb

Models: 400 800

1 58

Page 43

Recycling

The XPower Powerpack is designed to provide years of service. However, when the internal battery reaches the end of its service life, the XPower Powerpack itself is no longer of use. The internal battery is not designed to be user replaceable.

Because the internal battery contains lead, which can be hazardous if exposed to the environment, the XPower Powerpack should be recycled or safely disposed of at your local recycling depot.

Do not dispose of the XPower Powerpack with common household waste. Please ask your local authorities about recycling services that are available in your area.

Replacing the Built-in Light

To replace the light bulb:

1.Turn the light switch off.

2.Pop out the plastic lens cover.

3.Gently grasp the bulb and twist clockwise to unscrew the bulb.

4.Insert a replacement bulb of the same type and rating into the light reflector assembly.

5.Gently grasp the bulb and twist counter-clockwise to screw the bulb in.

6.Snap in the lens cover.

Page 43

Image 43

Xantrex Technology 400, 800 manual Recycling, Replacing the Built-in Light, To replace the light bulb

Contents

XPower Powerpack 200 Plus Owner’s GuideExclusion for Documentation About XantrexTrademarks Notice of CopyrightPurpose About This GuideOrganization Abbreviations and Acronyms Conventions UsedThe following conventions are used in this guide Warnings and Cautions Important Safety InstructionsWARNING Shock hazard. Keep away from children WARNING Limitations on use WARNING Explosion hazardWARNING Heated surface WARNING Fire hazardWARNING Fire hazard The boosting feature is designed for short term operation only- less than 4 seconds. Operating the boosting feature for more than 4 seconds may cause damage to the unit. Allow the XPower Powerpack 200 Plus to cool down for at least 3 minutes after each boostWARNING Fire hazard WARNING Risk of Explosion, Fire or Burns Precautions When Working With Your Vehicle Battery10. If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters your eyes, immediately flood them with running cold water for at least twenty minutes and get medical attention immediately Precautions for Using Rechargeable Appliances 3 Operation Contents2 Features 1 Introduction5 Troubleshooting 4 MaintenanceA Specifications Automatic Overload About the XPower Powerpack1 Introduction Comprehensive Protection11.0 V DC and the unit turns OFF at 10.5 V DC Low Battery ProtectionComprehensive Protection Materials List 2 Features1 DC Power Outlet XPower Powerpack FeaturesFront Panel Detail Feature DescriptionFeature Description 1 Light On/Off Switch Left Side ViewXPower Powerpack Features FeatureAccessory Description AccessoriesPage Attention Charge Before Use 3 OperationOperating Conditions and Guidelines Cool Choosing a LocationWARNING Fire or explosion from batteryTo recharge with the AC Charger Recharging with the AC ChargerUsing XPower Powerpack for the First Time Run Time on Typical AC Appliances Using the Built-in LightOperating AC Appliances Understanding AC AppliancesTrouble Appliances High Surge AppliancesTable 3-1 AC Appliances and Run Times Operating Several Appliances at Once Operating an AC ApplianceTo operate an AC appliance If you ignore the warning, the XPower Powerpack automatically turns off a few minutes later to prevent battery damage CAUTION Equipment damage Operating 12 V DC AppliancesTo operate a 12 V DC appliance Boosting a Vehicle’s EngineWARNING Fire hazard WARNING Fire hazard To boost a vehicle or boat engineWARNING Fire hazard 7. Switch ON the boosting power switchWARNING Fire hazard Using the Air CompressorOver-temperature Safety Protection WARNING Risk of personal injury or damage to equipmentTo inflate your vehicle, motorcycle, or bicycle tires Inflating TiresTo inflate small sports equipment Inflating Small Sports EquipmentWARNING Fire hazard WARNING Fire hazard Connecting to an External BatteryWARNING Acid spills WARNING Fire hazardPage Battery Maintenance 4 MaintenanceWARNING Shock hazard Recharging the XPower Powerpack Battery Recharging with the AC ChargerTo recharge with the AC Charger WARNING Fire and explosion hazard Recharging with the DC Charging CablePage Refer to the Owner’s Guide accompanying your generator for detailed instructions on connecting the generator to a unit like the XPower Powerpack Recharging with a Generator’s Regulated 12 V DC OutletWARNING Fire and explosion hazard Recharging from a Solar Panel To wire the coaxial DC connectorReplacing the Built-in Light RecyclingTo replace the light bulb Page Television Interference 5 TroubleshootingCommon Problems Buzz in Audio EquipmentProblem Troubleshooting ReferenceTable 5-1 Troubleshooting reference WARNING Electric shock hazardTroubleshooting Reference Table 5-1 Troubleshooting referenceProblem SolutionPossible Cause Table 5-1 Troubleshooting referenceProblem SolutionPossible Cause Table 5-1 Troubleshooting referenceProblem SolutionPossible Cause Table 5-1 Troubleshooting referenceProblem SolutionElectrical Specifications A Specifications12 V DC Section AC Power Section Electrical SpecificationsInternal Battery Charging Controller System XPower Powerpack Physical SpecificationsAccessories Physical specificationsPage Warranty Warranty and ReturnWarranty and Return DisclaimerProduct Exclusions975-0189-01-01 Return Material Authorization PolicyReturn Procedure Warranty and ReturnInformation About Your System Out of Warranty Service