Recharging the XPower Powerpack Battery
CAUTION
Do not operate AC or DC appliances while the XPower Powerpack is being recharged with the DC Charging Cable from your vehicle.
To recharge the XPower Powerpack while you drive using the DC Charging Cable:
1.While the vehicle engine is running, plug one end of the DC Charging Cable into the DC Power Outlet of the XPower Powerpack.
2.Plug the opposite end of the DC Charging Cable into the vehicle’s lighter socket or 12 V accessory outlet.
3.Once the XPower Powerpack is fully charged or if your vehicle’s engine is not running, disconnect the DC Charging Cable from both sockets.
Most of the XPower Powerpack’s capacity will be restored in 2 ½ hours while the vehicle engine is running.
Note: The Battery Status LED will not illuminate when the XPower Powerpack is recharged through the DC Charging Cable.
Note: The Battery Level LEDs are only accurate when the XPower Powerpack has been disconnected from all appliances and all charging sources for 15 minutes.
Important: Do not leave the XPower Powerpack permanently connected to the vehicle’s lighter socket or 12 V accessory outlet.
28
