Connecting to an External Battery
3.Connect the black negative
If the Red Boosting Connection LED illuminates and the Powerbox’s alarm sounds, then reverse polarity has been detected. Correct polarity must be established before proceeding. Disconnect the Boosting clamps from the vehicle’s battery and redo steps 2 and 3 in this procedure.
If no alarm sounds, and the Green Boosting Connection LED is illuminated, then proceed to the next step.
4.Switch ON the Boosting Power Switch.
To disconnect the cables from an external battery and from the XPower Powerpack:
1.Ensure that the Boosting Power Switch is OFF.
2.Remove the red positive (+) clamp, and then remove the black negative
3.Store the boosting clamps in the appropriate holder on each side of the XPower Powerpack.
4.Recharge the XPower Powerpack as soon as possible after use.
CAUTION
Do not recharge the XPower Powerpack when an external battery is connected. The AC charger may be damaged.
24