Operation
Note: The information in the table is for reference only. For precise pressure specifications, refer to the information supplied with the article to be inflated.
CAUTION
If the pressure gauge on the compressor indicates more than twice the recommended pressure for the object you are inflating, and you have only started to inflate the object, the valve connector is incorrectly connected to the valve stem. This may damage the XPower Powerpack 400 Plus. Remove and reattach the valve connector to the valve stem.
To inflate your vehicle, motorcycle, or bicycle tires:
1.Place the valve connector securely on the tire valve stem, push it as far as possible to allow normal airflow, and close the thumb latch. If necessary, use a supplied nozzle adapter.
2.Turn the compressor on, and inflate your tire to the recommended pressure. Use Table: Pressure Specifications for Common Items as a guide only.
3.Turn the compressor off after appropriate pressure is reached.
4.Open the thumb latch and remove the valve connector from the valve stem.
5.Check air pressure with a pressure gauge.
Note: Leave the thumb latch in the open position for storing to relieve pressure on the internal mechanisms.
