Maintenance
WARNING: Fire and Explosion Hazard
Do not use this recharging method if your vehicle has abnormally high voltage electrical systems that operate above 15 V DC. This may lead to accumulations of hydrogen, causing exposure to fire and explosion hazard.
CAUTION
Do not operate AC or DC appliances while the XPower Powerpack is being recharged with the DC Charging Cable from your vehicle.
To recharge the XPower Powerpack while you drive using the DC Charging Cable:
1.While the vehicle engine is running, plug one end of the DC Charging Cable into the DC Power Socket of the XPower Powerpack.
2.Plug the opposite end of the DC Charging Cable into the vehicle’s lighter socket or 12 V accessory outlet.
3.Once the XPower Powerpack is fully charged or if your vehicle’s engine is not running, disconnect the DC Charging Cable from both sockets.
Most of the XPower Powerpack’s capacity will be restored in four hours while the vehicle engine is running.
Note: The green Charging Status light will not illuminate when the XPower Powerpack is recharged through the DC Charging Cable.
Note: Battery Charge (%) indicator is only accurate when the XPower Powerpack has been disconnected from all appliances and all charging sources for fifteen minutes.
|
