Safety

4.To reduce the risk of electrical shock, disconnect both AC and DC power from the inverter before working on any circuits connected to

the inverter. Turning the On/Standby switch to Standby () will not reduce this risk.

5.Protect the inverter from rain, snow, spray, and water.

6.To reduce the risk of overheating, keep the ventilation openings clear, and do not install the inverter in a compartment with limited airflow.

Explosive Gas Precautions

1.Batteries generate explosive gases during normal operation. Be sure you follow all relevant instructions exactly before installing or using your inverter.

2.This equipment contains components which tend to produce arcs or sparks. To prevent fire or explosion, do not install the inverter in compartments containing batteries or flammable materials or in locations that require ignition-protected equipment. This includes any space containing gasoline-powered machinery, fuel tanks, as well as joints, fittings, or other connections between components of the fuel system.

FCC Information to the User

This Class B device complies with Part 15 of the FCC Rules and all requirements of the Canadian Interference-Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

vi

445-0167-01-01

Page 8
Image 8
Xantrex Technology RS400 manual Explosive Gas Precautions, FCC Information to the User