Optional Accessory: Remote Switch

An optional remote switch can be plugged into the remote switch jack at the back of the RS400. It lets you switch the RS400 from on to standby from a convenient location—up to 25 feet (7.5 m) away from the inverter (using the cable supplied with the switch).

Dimensions of Remote Switch

Height

2.5 inches (63.5 mm)

Width

2 inches (50.8 mm)

Depth

1.1 inches (28.3 mm)

Cable length

25 feet (7.5 m)

Part number of Remote Switch

To purchase a remote switch, please contact Customer Service for a referral to a distributor. Please provide the part number 808-2400. See page ii for contact information.

Instructions for installing and using the remote switch are included in the remote switch package and the RS400 Sine Wave Inverter Installation Guide.

Note: The remote switch jack at the back of the RS400 may not be accessible once the inverter has been mounted.

If you intend to use the remote switch with an RS400 that has already been installed, consult a qualified service technician before installing and connecting the remote switch.

1–6

445-0167-01-01

Page 16
Image 16
Xantrex Technology RS400 manual Optional Accessory Remote Switch, Dimensions of Remote Switch, Part number of Remote Switch