TMTM
This guide for use by qualified installers only.
Freedom SW 3000Sine Wave Inverter/Charger

Installation Guide

FREEDOM SW 3000
Inverter Reset Enable Inverter AC/ On Charge FaultXanbus InterfaceFREEDOM SW 3000 Inverter Reset Enable Inverter AC/ On Charge FaultXanbus Interface
Date of Manufacture
Serial Number
CAUTION:
To reduce the risk of fire, do not
cover or obstruct ventilation openings. Do not mount
in a zero-clearance compartment. Overheating may
result. Do not expose to rain or spray.
INSTALLATION REQUIREMENTS:
Mount this inverter/charger only in the orientations
specified in the installation guide provided.
WARNING:
Shock hazard. Do not open. No
user serviceable parts. Energized from both AC and
DC sources. Disconnect all sources before servicing.
Use only ground-fault circuit interrupters (GFCI)
specified in the installation guide supplied. Other
types may fail to operate properly when connected to
this equipment. Refer to manual. Charge only
lead-acid batteries. Other battery types may burst
causing personal injury and damage.
Nominal DC Operating Voltage: 12 Vdc
Nominal AC Output Voltage: 120 Vac , 1Ø
Nominal AC Output Frequency: 60 Hz
Max. Continuous AC Output Current: 25 A
Max. Operating DC Input Current: 320 A
Max. Continuous AC Output at Nominal DC
Input: 3000 VA at 25°C
Max. Output Surge Power (5 s duration): 6000 VA
Max. DC Input Voltage: 16 Vdc
Max. Ambient Temperature: 50°C
Inverter Mode:
Nominal AC Input Voltage: 120 Vac , 60 Hz, 1Ø
Power Factor: > 0.95
Charging DC Output Voltage Range: 5.0 - 16.0 Vdc
Max. Continuous Battery Charger DC Current at
Nominal AC Input: 150 A
Max. AC Input Current: 30 A per line Split Phase,
30 A per line Dual
Charger Mode:3000W SINEWAVE INVERTER/CHARGERFSW3000815-3000
Model
Number
FGA
Number
FREEDOM SW 3000
Designed in Canada
Assembled in China
DANGER:
To reduce the risk of explosion, do not
install in an area in which ignition-protected
euipment is required.
UL 458
CSA 107.1-01
3033614

FREEDOM SW 3000

FREEDOM SW 3000