975-0546-01-01 3

This guide for use by qualified installers only.
Installation Information

Before You Begin the Installation

Before beginning your installation:
• Read the entire Installation Guide so you can plan the installation from
beginning to end.
• Read the Xanbus System Installation Guide to plan your network
requirements.
• Assemble all the tools and materials you require for the installation.
• Review the Important Safety Instructions on pageiv.
• Be aware of all safety and electrical codes which must be met.

Installation Codes

Applicable installation codes vary depending on the specific location and
application of the installation. Some examples are:
• The U.S. National Electrical Code (NEC)
• The Canadian Electrical Code (CEC)
• Canadian Standards Association (CSA) and RV Industry Association
(RVIA) for installation in RVs.

ELECTRICAL SHOCK AND FIRE HAZARDS

• All wiring should be done by qualified personnel to ensure
compliance with all applicable installation codes and regulations.
• Disconnect all AC and DC power sources.
• Disable and secure all AC and DC disconnect devices and automatic
generator starting devices.
Failure to follow these instructions will result in death or serious
injury.