Xantrex Technology SW Communications Adapter The SWCA Programming Menu Function Keys, Operation

3.0 OPERATION

The SWCA Programming Menu Function Keys

Programming features are accessed by pressing ￿￿￿￿￿￿and by using the function keys as described in Table 3-1.

Key	Purpose
	Changes SWCA ID number from the default of 1
	to any number up to 8.
F1	After changing the ID number, write the adapters
	new ID number on the outside of the adapter's
	gray housing to make later identification of the
	adapter easier.
	Changes the adapter's configuration code. This
	alters the operation of the adapter.
F2
	Do not change this code from the default
	value of "06" .
	For typing in any text string to allow later
F3	identification of the adapter.
	Type in desired information and press <Enter>.
ECS	Leaves the programming menu.

Table 3-1

The SWCA Programming Menu

NOTE: If the program does not find an adapter it indicates a TIMEOUT ERROR. Check the adapter and cable for proper connection and retry the program.

©2002 Xantrex Technology Inc.

P/N 973-0022-01-01 Rev A 04/2002 11