Xantrex Technology SW Communications Adapter LED Control Indicators, Abbreviation, Definition

3.0 OPERATION

LED Control Indicators

The codes indicate the status of the inverter’s LEDs. The two letter codes are as follows:

Abbreviation	Definition
IN	Inverting
LT	Line Tie
A1	AC1 IN
A2	AC2 IN
BK	Bulk
FL	Float
ER	Error
OC	Over Current

Table 3-2

LED Control Indicator Definitions

If no codes display, it is because there are no LEDs on or the adapter is not responding.

NOTE: If an LED is flashing, it may not appear each time you pressed “1” because it was not illuminated when the SWCA sent the data to the computer. A flashing o LED should be indicated by the LED two letter code being repeated on the display.

©2002 Xantrex Technology Inc.

12 P/N 973-0022-01-01 Rev A 04/2002