1. Introduction
No. | Component | Function |
|
|
|
9 | Stop | Temporarily stops the current job. Follow the message to cancel or resume |
|
| your job. |
|
|
|
10 | Start | Starts the job. |
|
|
|
11 | Numeric Keypad | Enter the number of copies, a password, and other numerical values. |
|
|
|
12 | Clear | Deletes numeric values or the last digit entered. |
|
|
|
13 | Language | Changes text to an alternative language. |
|
|
|
14 | Log In/Out | Provides password protected access to the System Administration menu, |
|
| which is used to adjust the defaults on the machine. |
|
|
|
15 | Brightness dial | Adjusts the brightness of the Touch screen. |
|
|
|
Powering on and off
Switch on the power before operating the machine. The machine warms up in approximately five minutes, after which you can make copies. Switch off the machine at the end of the day or when it is not in use for a long period of time.
Power on
To power on the machine:
1.Open the cover.
2.Press the power switch to the on position [].
NOTE: The "Please wait..." message on the UI indicates that the machine is warming up. The machine cannot be used while it is warming up.
Power off
1.Wait until all copy and print jobs have completely finished.
2.Press the power switch to the off position [
].
1- 4 | Xerox 4112/4127 Copier/Printer Quick Start Guide |
