Xerox 5735, 5790, 5775, 5745, 5740, 5755 manual External Connections, USB Ports

XEROX WorkCentre 5735/5740/5745/5755/5765/5775/5790 Information Assurance Disclosure Paper

2.2.3. External Connections

Figure 2-3 Back panel connections

Interface	Description / Usage
FAX line 1, RJ-11	Supports FAX Modem T.30 protocol only
FAX line 2, RJ-11	Supports FAX Modem T.30 protocol only
USB Host Port	Software upgrade
PSW USB Target Port	Direct-connect printing; Xerox diagnostic tools (PSW and CAT)
	and Xerox copier assistant
Ethernet	10/100/1000 Network connectivity
Scanner	Proprietary connection between the scanner and controller
	carrying power and communications
Serial Port	Engineering development debug; default state is disabled
Foreign Device Interface (FDI)	Allows connection of optional access control hardware

Table 4 Controller External Connections

2.2.4. USB Ports

The WorkCentre contains a host connector for a USB flash drive, enabling upload of software upgrades and download of network logs or machine settings files.

Autorun is disabled on this port. No executable files will be accepted by the port.

Modifying the software upgrade, network logging or saved machine settings files will make the files unusable on a WorkCentre .

The data in the network logging file is encrypted and can only be decrypted by Xerox service.

The machine settings that can be saved and restored by a service technician are limited to controller and fax parameters that are needed for normal operation. For example, the fax address book can be saved and restored by a service technician.

There is no method for a user, administrator or technician to move image data from the WorkCentre to a USB device.

USB

USB port and location	Purpose
USB Host ports	Software upgrade

Ver. 2.00, March 2011 Page 10 of 50