Xerox 5755, 5790, 5775, 5745, 5740 Scanner, Hardware, USB Ports, Fax Module memory components

XEROX WorkCentre 5735/5740/5745/5755/5765/5775/5790 Information Assurance Disclosure Paper

USB Target port

Direct-connect printing; Xerox diagnostic tools (PSW and CAT) and Xerox copier assistant

Table 5 USB Ports

2.2.Fax Module

2.3.1.Purpose

The embedded FAX service uses the installed embedded fax card to send and receive images over the telephone interface.

2.3.2. Hardware

The Fax module contains the fax modem and RJ-11 connector. The Fax modem implements the T.30 fax protocol. The Fax module contains a CPU, BIOS, RAM, and Non-Volatile Memory.

Volatile Memory Description

Type (SRAM, DRAM, etc)

SDRAM

Size

80MB

User Modifiable	Function or Use
(Y/N)
N	FAX Card volatile memory

Process to Clear:

No user image data stored

Additional Information:

All memory listed above contains code for execution and configuration information. No user or job data is permanently stored in this location.

Non-Volatile Memory Description

Type (Flash, EEPROM, etc)

Flash ROM

Size

4MB

User Modifiable	Function or Use
(Y/N)
N	FAX executable code.

Process to Clear:

No user image data stored.

Additional Information:

All memory listed above contains code for execution and configuration information. No user or job data is stored in this location.

Table 6 Fax Module memory components

2.4.Scanner

2.4.1.Purpose

The purpose of the scanner is to provide mechanical transport of hardcopy originals and to convert hardcopy originals to electronic data.

2.4.2. Hardware

The scanner converts the image from hardcopy to electronic data. An optional document handler moves originals into a position to be scanned. The scanner provides enough image processing for signal conditioning and formatting. The scanner does not store scanned images. All other image processing functions are in the copy controller.

The DADF/Scanner contains a CPU, BIOS, RAM, and Non-Volatile Memory.

Ver. 2.00, March 2011 Page 11 of 50