Performing routine tasks
Loading paper in the paper trays
Demonstrate the steps as you describe them.
You may have three paper trays. To load paper in a paper tray:
1. | Face the DocuColor 4 Copier/Printer so that |
| you are directly in front of the paper tray. |
2. | See Figure 7. Open the tray by pulling it |
| straight out. |
3. | Press down on the metal plate until it latches. |
4. | Take the paper out of the wrapper. |
5. | See Figure 8. Move the paper guides toward the |
3
2
Figure 7
outer edges of the paper drawer. |
6. Place the stack of paper in the drawer with the cor- |
ners under the fluke at the front right side. Add |
paper up to the Max line. Straighten the paper |
stack so the edges are even. |
5
5
6
Figure 8
7.See Figure 9. Set the rear paper guide to the length of the paper.
8.Set the side paper guide to the width of the paper.
Note: Align the “t” mark on the side paper guide with the appropriate paper size mark on the tray. If the side guide is out of position, automatic paper size detection will not work.
9.Close the tray by pushing it completely into the printer.
7
8
9
Figure 9
Getting to Know Your Product
6 | Product Orientation Guide |
