Xerox 701P47301 manual Testing the Printer Connection, Reference Documents Windows

NOTE: The printer IP Address is specified during the initial software load. Set the TCP/IP port number in the IPS Manager System Configuration dialog.

2.Infoprint Manager procedure (Refer to the Infoprint Manager for Windows: Introduction and Planning Guide and the Infoprint Manager for Windows: Getting Started)

Reference Documents - Windows

The following documents provide additional information on

WIndows-to-IPDS printer connectivity.

Table A-4. Reference Documents - Windows

Title	Publication
	number
Infoprint Manager for Windows: Introduction and	G544-5716
Planning Guide
Infoprint Manager for Windows: Getting Started	G544-5717
IBM Infoprint Manager for Windows: Procedures	G544-5814
IBM Infoprint Manager Reference	S544-5475

IBM Infoprint Manager for Windows manuals are available on the

IBM website.

Testing the Printer Connection

Test the printer by one of the following methods to ensure the system can make a connection with the Xerox FreeFlow Print Server IPDS printer:

•Ping the printer from your system to establish a connection with the TCP/IP attached Xerox FreeFlow Print Server IPDS system.

•Send a job from the host through PSF or Infoprint Manager (depending on your host) to print on the Xerox FreeFlow Print Server IPDS system.

A-6 IPDS User Guide