Xerox E422VA user manual Connecting Your DVD Player, HDMI Connections for DVD Players with DVI

VIZIO E422VA User Manual

Connecting Your DVD Player

Using HDMI (Best)

DVD players that have a HDMI digital interface should be connected using HDMI for optimal results. To maintain image quality, use a VIZIO certified HDMI cable. This cable is available in 6, 15, and 30 foot lengths. Visit www.VIZIO.com or call 877-MYVIZIO(877- 698-4946) for details.

1.Turn off your HDTV and DVD player.

2.Connect a HDMI cable to the HDMI output of your DVD player and the other end to the HDMI 1, 2, 3, or HDMI-4jack on your HDTV.

3.Turn on the power to your HDTV and your DVD player.

4.Select HDMI-1,HDMI-2, HDMI-3,or HDMI-4using the INPUT button on the remote control or side of the TV.

Note:

•The HDMI input on your HDTV supports High-bandwidth Digital Content Protection (HDCP). HDCP encrypts the transmission between the video source and the digital display for added security and protection.

•Refer to your DVD player user manual for more information about the video output requirements.

HDMI Connections for DVD Players with DVI

1.Turn off your HDTV and DVD player.

2.Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI end to the HDMI 1, 2, 3, or HDMI-4jack on your HDTV.

3.If signal source has left and right audio outputs (L and R), a 1/8” stereo audio cable is needed, as shown in picture above.

4.Turn on the power to your HDTV and your DVD player.

5.Select HDMI-1,HDMI-2, HDMI-3,or HDMI-4using the INPUT button on the remote control or side of the TV.

Version 10/29/2010	25
	www.VIZIO.com