Page 5-34 Xerox FaxCentre F12 User Guide
ØPress [Enter] to confirm the number on the LCD display.
The display asks you to enter another fax number to send
the document.
ØPress the or navigation keys to display ’YES’ or
‘NO’ appropriately and press [Enter]. You can add up to 25
destinations.
ØThe LCD display asks you to enter a name. If you want to
assign a name to the transmission, enter the name. If not,
skip over this step.
For details on how to enter the name using the number
keypad, see “Entering Characters Using the Numeric
Keypad” on page 2-9.
ØPress [Enter]. The display shows the current time and asks
you to enter the start time when the fax is to be sent.
ØEnter the specific start time using the number keypad, then
press [Enter] to save the setting.
NOTE: Press to switch between ‘AM’ and ‘PM’.
ØThe document will be scanned into the memory before
transmission. The display shows the memory capacity and
the number of pages being stored in the memory.
ØThe FaxCentre returns to Standby mode and the LCD
display reminds you that you are in Standby mode and that
Delayed Transmission is set.