Page 4

ColorWise Pro Tools for Windows and Mac OS computers are fundamentally the same. The windows and dialog boxes illustrated are the Windows versions.

NOTE: Changing the calibration has the potential to affect all jobs for all users, so you may want to limit the number of people authorized to perform calibration.

TO CALIBRATE THE COPIER USING CALIBRATOR

1.Launch ColorWise Pro Tools and connect to the Fiery.

For instructions on configuring the connection for ColorWise Pro Tools, see

Getting Started.

2.Click Calibrator.

The EFI ED-100 is available as a measurement method. This information is provided to Calibrator by the Fiery. If the option does not appear, make sure you are connected to a Fiery that supports the EFI ED-100. Not all Fierys support the EFI Densitometer ED-100.

NOTE: It is very important that the copier you are calibrating and the computer that the EFI ED-100 is connected to are connected to the same Fiery server. Also, be sure to print the measurement patches from the copier you are calibrating, because the EFI ED-100 uses formulas specific to the copier to convert the raw EFI ED-100 measurements into ColorWise Calibrator compatible densities.

Part number: 45022476