installation guide...

Key points to remember.

There are some essential issues relating to the application and installation of the equipment which must be observed for problem free operation:

νThe maximum length of ducting is one metre

νThe unit must be mounted against an outside wall

νWhere possible the unit should be positioned towards the centre of the selected wall and check weight specification

νThe diameter of the supplied ducting must not be reduced or restricted

νThe insulated duct must be used on the right hand side the product (viewed from the outside) and with the insulation adjacent to the rear of the unit

νIt is essential that the units are installed perfectly level, failure to do so can lead to malfunction of the drip tray float valve causing water damage

νThe units with reverse heat pumps must be provided with a means of drainage since the ice that forms on the coil is melted off every 30 minutes - this cannot be evaporated in the way the other condensate is discharged

νCare must be taken to ensure that the inlet and outlets are not obstructed in any way, such as by plants and bushes

νOnly the inlet and outlet grilles supplied with the equipment must be used

νWhen the unit is mounted at high level, it is necessary to activate the room temperature differentiation function, this compensates for the stratification of heat

νThe cored holes must be angled slightly downwards towards the outside to prevent any condensate running back into the unit

Superior Climate Control

For added flexibility Digitemp can be installed at high or low level to maximise floor space. The refrigerant system is factory sealed so installation does not involve opening the system or connection of any hoses.

The modular approach means that maintenance only affects one unit / room at a time, the remainder of the building is unaffected.

Air flow in heating mode

(shown on high level installation)

Air flow in cooling mode (shown on low level installation)

Page 5 Page 7
Page 6
Image 6
Xpelair Digitemp manual Installation guide, Key points to remember
Page 5 Page 7

Digitemp specifications

The Xpelair Digitemp is a state-of-the-art temperature control device designed to provide optimal heating and cooling solutions for residential and commercial spaces. Renowned for its precise temperature regulation and user-friendly operation, the Digitemp series includes several models aimed at catering to diverse requirements.

One of the primary features of the Xpelair Digitemp is its digital thermostat, which allows users to set and maintain their desired indoor temperature with remarkable accuracy. The easy-to-read LCD screen provides real-time temperature readings and intuitive access to various settings, making it a breeze for users to adjust their comfort levels swiftly.

The device employs advanced digital technology that ensures efficient energy usage. By incorporating smart algorithms, the Digitemp optimizes heating and cooling cycles, reducing energy consumption while ensuring a consistent and comfortable environment. This makes it an environmentally friendly choice for those looking to minimize their carbon footprint.

In addition to its energy-efficient performance, the Xpelair Digitemp is equipped with programmable scheduling capabilities. Users can set specific heating or cooling times to align with their daily routines. Whether it's preheating a room before waking up or cooling it down just before arriving home, users can enjoy ultimate convenience and comfort tailored to their lifestyle.

Another notable characteristic of the Xpelair Digitemp is its compatibility with various heating and cooling systems, including electric, gas, and heat pump systems. This versatility allows homeowners and business operators to seamlessly integrate the device into their existing setups without significant modifications.

For enhanced user experience, the Digitemp includes a user-friendly interface that facilitates quick adjustments and custom configurations. Additionally, its sleek and modern design makes it a visually appealing addition to any indoor space.

Durability and reliability are also hallmarks of the Xpelair Digitemp, constructed with high-quality materials that ensure long-lasting performance. With a focus on safety, features like circuit protection and fail-safes offer peace of mind for users.

In summary, the Xpelair Digitemp stands out as a leading choice for temperature control, blending advanced technology with user-friendly features to deliver exceptional comfort and efficiency. Its programmability, compatibility with various systems, and modern aesthetic make it a valuable asset for any environment.
Top Page Image Contents