Yamaha AV-S70 ■ Connecting a TV (monitor) to enjoy digital audio

CONNECTIONS

■ Connecting a TV (monitor) to enjoy digital audio

Connect one of these

Optical fiber cable (EIA standard) (commercially available)

Front speaker unit

SUBWOOFER

	DIGITAL 2	DIGITAL 1
	( /PCM)	(	/PCM)
INPUT	L		THROUGH
	AUX	TV	VIDEO OUT	Anti-dust cap
			MARK
	R
			SYSTEM	Anti-dust cap
			CONNECTOR
				Remove the cap covering the DIGITAL 1
				terminal (optical) when connecting an
			TV (monitor)	optical fiber cable. Safely store the cap
				and always re-insert it in the terminal
Audio connection cord (1 pin)				when the terminal is not in use. (This cap
				prevents the entrance of dust.)
(commercially available)

VIDEO IN

COAXIAL DIGITAL

VIDEO OUT

OUTPUT

OPTICAL DIGITAL

DVD player, LD player, etc.

Connect the optical terminal or coaxial terminal of the LD or DVD player to the DIGITAL 1 (optical) terminal or DIGITAL 2 (coaxial) terminal of the front speaker unit using a commercially available optical fiber cable or audio connection cord

(1 pin).

Notes

•You need to make digital connection between this unit and your component to enjoy a Dolby Digital source.

•The audio of the LD or DVD player can be heard from the front speaker unit, but not from the TV speakers. The audio of the LD or DVD player cannot be heard when the front speaker unit’s power is turned off.

•If your LD player has a Dolby Digital RF signal output terminal, be sure to use the RF demodulator (separately purchased).

•No sound will be heard when connecting your LD player’s Dolby Digital RF signal output terminal directly to this unit’s DIGITAL 2 terminal.

12