INSTALLATION
To prevent the front speaker unit from falling, secure it with the provided velcro strip when placing it on a television or other device. Also, use the height adjustment bracket on the rear of the front speaker unit when there is not enough space for installation or when the surface is sloped.
Using the Velcro Strips
Precautions before installation
•Do not touch the adhesive surface after peeling off the strip as this will weaken its adhesive strength.
•Thoroughly wipe clean the surface where the velcro strip is to be applied. Note that adhesive strength is weakened if the surface is dusty, oily or wet and that this may cause the front speaker unit to drop.
PREPARATION
1Peel off the seal of the velcro strip with the rough surface and apply to the protrusions on the bottom of the front speaker unit.
Wrap the strip tightly with sides of the tape well aligned with the edges of the protrusion.
Rough surface | Front speaker |
| (bottom panel) |
Protrusion
2Place the front speaker unit where it is to be installed (ex. on top of the television ) to determine where to apply the velcro strip with the smooth surface.
Position so that the position of the velcro strip stuck to the front speaker unit matches that of the velcro strip stuck to the top of the television.
3Peel off the seal of the velcro strip with the smooth surface and apply to the positions determined in step 2.
Peel off the seal.
Smooth surface
4Align both the velcro strip on both sides and firmly press downward on the top of the front
speaker unit.
Press down.
Note
• Once the front speaker unit is secured in this way, the paint on the |
| |
television surface used for installation may peel off when velcro | English | |
strip is removed later. Be sure to apply velcro strip after carefully | ||
|
checking the surface to be used for installation.
7