OPERATION
OPERATING THE UNIT
Enjoying the Home Theater Sound System
This section describes how to select audio output from A/V component such as a TV, VCR, or DVD, LD, CD player, or MD recorder as input source to the Home Theater Sound System
First turn on the playback component and the TV, and then follow the steps given below.
1 2 | 3 | 1 |
|
|
3
2
1Press POWER (or p on the remote control) to 3 Adjust the level using VOLUME +/– (or VOL +/–
turn on the power. |
| on the remote control). |
|
|
| Pressing VOLUME + (or VOL + on the remote control) | |
| or | increases the level, while pressing VOLUME – (or | |
| VOL – on the remote control) decreases the level. | ||
|
| ||
Front panel | Remote control |
|
|
If the STANDBY indicator is lit, turn on the power | or |
| |
using p on the remote control. If the main power is |
|
| |
off (when the STANDBY indicator is not lit), turn on |
|
| |
the power by pressing POWER on the front speaker | Front panel | Remote control | |
unit. |
| ||
|
|
| |
2Press the INPUT selector button.
Each time the button is pressed, the input source will be switched in the order: VIDEO → TV → AUX → DIGITAL 1 → DIGITAL 2.
or
Front panel | Remote control |
OPERATION
English
17