Yamaha AV-S70 ■ Using auto preset

OPERATING OTHER COMPONENTS USING THE REMOTE CONTROL
■ Using auto preset
	3 Hold down SET and press c until the
	transmission indicator lights.

Transmission indicator

2 3,5

4

1Turn on the power of the component (TV, VCR or satellite tuner/cable TV) to be controlled by the remote control.

2Press the remote control selector button corresponding to the component for which auto preset is to be performed. (Press “TV” for TV, “VCR” for VCR, and “SAT” for satellite tuner/cable TV.)

The signals for controlling the front speaker unit have already been set for the S70 button so that only the manufacturer code for the TV, VCR or SAT needs to be set. A manufacturer code can be set for a single button if necessary.

The indicator will light.

4While the transmission indicator is lit, using the numeric buttons, if you selected “TV” under step 2, enter “0001”; if you selected “VCR”, enter “0002”; and if you selected “SAT”, enter “0003” for satellite tuner or “0004” for cable TV.

The indicator will go out.

5Hold down SET and press c until the transmission indicator lights.

The indicator will light.

24