CONTROLS AND THEIR FUNCTIONS

8CD input selector button [ (Stop), / (play/pause)]

When an input source other than the built-in CD player is selected, pressing this button selects the CD player as an input source and starts playback if a disc is loaded on the disc tray.

While playing back a disc, pressing the lower side

(/ ) of this button pauses the playback. Pressing the lower side again resumes the playback.

While playing back a disc, pressing the upper side ( ) stops the play.

9TUNER input selector button

[ (up)/ (down)]

When an input source other than the built-in tuner is selected, pressing this button selects the tuner as an input source.

When the tuner is in the automatic or manual tuning mode, this button is used for tuning search. Pressing the upper side ( ) makes a tuning search to higher frequencies, and pressing the lower side ( ) makes a tuning search to lower frequencies.

When the tuner is in the preset tuning mode, this button is used for selecting a preset station number. Pressing the upper side ( ) selects a higher preset station number and pressing the lower side ( ) selects a lower preset station number.

<For U.K. and Europe models only>

When the tuner is in the PTY SEEK mode, pressing this button changes the currently selected program type.

0VOLUME button [ (up)/ (down)]

Pressing the upper side ( ) raises and pressing the lower ( ) side lowers the volume of whole sound output of this system.

APHONES jack

When you listen with headphones, connect the headphones to the PHONES jack. You can listen to the sound to be output from the front speakers through headphones.

When listening with headphones privately, switch off the digital sound field processor (so that no DSP program name is illuminated on the display) by pressing the DSP ON/OFF button on the remote control transmitter.

BMEMORY button

This button is available when the tuner is selected. When this button is pressed, “MEMORY” flashes on the display for about 5 seconds. During this period, select a desired preset station number by pressing the TUNER “ ” or “ ” button on the front panel (or the PRESET station number selector “ ” or “ ” button on the remote control transmitter) and press the MEMORY button again to enter the displayed station into the memory.

When this button is pressed and held for about 2 seconds, the automatic preset tuning begins. (Refer to page 37 for details.)

TIME ADJ

This button is also used for setting the built-in clock. (See page 25 for details.)

CAUTO/MAN’L button

Press this button to switch the tuning mode to automatic or manual. To select the automatic tuning mode, press this button so that “AUTO” lights up on the display. To select the manual tuning mode, press this button so that “AUTO” goes off.

TIMER

This button is also used for setting the built-in timer. (See pages 49 to 50 for details.)

DPRESET/BAND button

Whenever this button is pressed, the mode of tuner is changed to the FM band reception mode, AM band reception mode and the preset tuning mode in turn.

<For U.K. and Europe models only>

The mode of tuner is changed to the FM mode, MW mode, LW mode and the preset tuning mode in turn.

EDISPLAY button

Used for setting the built-in clock, timer, etc. (See pages 25 and 49 to 50 for details.)

FVIDEO 2 input terminals

Connect an auxiliary video or audio input source unit such as a camcorder to these terminals. The source connected to these terminals can be selected by the corresponding input selector button.

English

E-19