Yamaha AV1 Automatic preset tuning, TUNER, Notes, MEMORY, To recall a preset station, <For U.K. and Europe models only, When the automatic preset tuning is completed

LISTENING TO A RADIO PROGRAM

2

MEMORY AUTO/MAN’L		PRESET/BAND DISPLAY
VIDEO 2
TIME ADJ	TIMER
/	/	REPEAT
HOUR	MIN

/

OPEN/CLOSE CD

PRESET

TUNER

CD

CENTER/REAR

/DELAYLEVEL

C/R/D

PROGRAM

ON/OFF DSP

SUBWOOFER

TEST

INPUT

SLEEP

POWER AMP VOLUME

					Automatic preset tuning
					You can also make use of an automatic preset tuning
1					function. By this function, this tuner performs automatic
					tuning and stores stations with strong signals
					sequentially. Up to 40 stations are stored
					automatically in the same way as in the manual preset
	TRACK PRESET				tuning method on page 35.
					1 Select the built-in tuner as the input source by
						pressing the TUNER input selector button.
TUNER			TAPE/MD	VCR	2 Press and hold the MEMORY button for about 2
						seconds.
						* “MEMORY” and “AUTO” will flash.
							AUTO
							MEMORY
					This tuner performs automatic tuning and searches FM
					and AM (MW and LW for U.K. and Europe models
					only) stations in that order. Received stations are
					programmed to the preset station number A1, A2, A3...
					A8, B1... sequentially.
					When the automatic preset tuning is completed
					The display shows the frequencies of the first preset
					station (stored to A1).
					Check the contents and the number of preset stations
					by following the procedure of the section “To recall a
					preset station” on the previous page.
		1			To recall a preset station
					Simply follow the procedure of the section “To recall a
					preset station” on the previous page.
					Notes
					•	The automatic preset tuning search will be performed
						through all frequencies until 40 stations are stored. If
						the number of received stations is less than 40, the
						search will stop after searching all frequencies.
						* Since FM stations are searched for first, there may
						be a case that 40 preset stations are occupied by
						FM stations only.
					•	With this function, only stations with sufficient signal
						strength are stored automatically. If the station you
						want to program is weak in signal strength, tune in
						to it with the Manual tuning method (in monaural)
						and program it by following the procedure of the
						section “To store stations” on page 35.
					•	You can replace a preset station by another FM or
						AM (MW or LW) station manually by simply following
						the procedure of the section “To store stations” on
						page 35.
					•	<For U.K. and Europe models only>

English

E-37

This tuner is originally set so that only RDS stations are searched instead of all FM stations by this operation. (FM stations that employ no RDS network service cannot be programmed.)

However, you can change the setting so that the unit can program not only RDS stations but also other FM stations. (Refer to page 43 for details.)