Yamaha AV1 TIMER PLAY, 2-➀, 2-➁, 2-➁, Note, TIMER, DISPLAY, DISPLAY, DISPLAY, English, For tuner:, PRESET/BAND, ➀Current time, For CD player:, Setting procedure:

HOW TO USE THE BUILT-IN TIMER

TIMER PLAY

					TRACK PRESET
MEMORY	AUTO/MAN’L		PRESET/BAND DISPLAY
VIDEO 2
TIME ADJ		TIMER
/		/	REPEAT
HOUR		MIN		/
			OPEN/CLOSE	CD	TUNER	TAPE/MD	VCR

2-➀2 2-➁

		PRESET
	TUNER
	CD
CENTER/REAR		LEVEL
/DELAY
C/R/D
		PROGRAM
ON/OFF	DSP
		SUBWOOFER
TEST			2-➁
		INPUT
SLEEP
POWER	AMP	VOLUME

By using the built-in timer, you can set the time when this system turns on and a source begins playing automatically, and the time when this system turns into the standby mode automatically.

1 Prepare the source to be played.

For tuner:

Tune in to the station you will listen to.

For CD player:

Load a disc on the disc tray.

2 Press the DISPLAY button.

Whenever the DISPLAY button is pressed, the display mode changes as follows.

On each mode, make a setting for the timer play, following the setting procedure described below.

→ ➀ Current time (TIMER on/off mode) → ➁ Source selecting mode (TUNER, CD) → ➂ ON TIME/Time setting mode → ➃ OFF TIME/Time setting mode

→ ➄ Normal display mode

Note

The display mode will be changed to the next mode after about 8 seconds elapse in turn automatically. If the mode is changed before the setting is completed, call the mode again by pressing the DISPLAY button once or more.

Setting procedure:➀Current time

Check to be sure that the current time is correct, and press the TIMER button so that “TIMER” lights up on the display.

➁Source selecting mode

Select the source (TUNER or CD) to be played by pressing the corresponding input selector button.

*If “TUNER” is selected, soon it is changed to the frequency display mode. In this mode, you can select the station to listen to by the timer play by using the PRESET/BAND button and

/ button.

English

E-49