Yamaha aw1600 owner manual MOVE

List of editing commands
133
AW1600 Owner’s Manual
12
Track editing
Moves the specified region of data to the specified loca-
tion of the specified track. This is similar to COPY, but
differs in that the move-source data will be deleted.
●For an audio track
●For a pad track (loop)
●For a pad track (one shot)
The parameters are the same as for the COPY command.
However, you cannot select CLIP for 1 From TR. Also,
there is no L To Times setting.
*3. Measure lock function (6 Start Measure Lock, 7 End Measure
Lock)
“Measure lock” is a function that matches the beginning of the mea-
sure or beat included in the copy-source region with the desired
location of the copy-destination.
To use the measure lock function,
move the cursor to the measure dis-
play field of From Start or From End,
specify the measure/beat location
that will be the reference point for
the matching, and press the
[ENTER] key. A “lock” icon will appear beside the value that you
specified, and the measure lock function will be turned on for From
Start or From End. (This can be turned on for either Start or End, not
both.)
While the measure lock function is on, the value of that measure dis-
play format setting will be fixed, and cannot be modified. In this state
if you use the counter display format field to specify the From Start
and From End locations, and execute the copy, the location you
specified in the measure display format field will be aligned with the
copy-destination To Start setting.
●When measure lock = on
*4. The possible choices for 8 To TR (copy-destination track) will
depend on your selection for 1 From TR (copy-source track).
If 1 From TR is a single audio track 1–16, you will be able to select
only a single audio track 1–16.
If 1 From TR is CLIP, ST, 1/2–15/16 (a pair of adjacent audio
tracks), you will be able to select only ST or 1/2–15/16 (a pair of
adjacent audio tracks).
If 1 From TR is PAD, you will be able to select only PAD.
If 1 From TR is ALL (OVER) or ALL (INS), you cannot select TO
TR.
*5. Grid function (M GRID)
When this function is on, the To Start location cannot be specified in
counter-display format; it can be specified only in measure/beat
units.
By using the Grid function in conjunction with the Measure Lock
function, you can easily copy measure/beat-length segments of data
whose divisions do not fall precisely on the measure or beat.
A 4 5 6 E F G H
COPY
Start
To Start
From
Track
To
Track
From
Track
To
Track
End
Measure
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
A B C D E F G H
To Start
MOVE
5
4
7M
61 23
89J K
MOVE
Start
To Start
From
Track
To
Track
From
Track
To
Track
End
1 2 3 4 5 6 7 8
A B C D E F G H
1 2 3 4 5 6 7 8
A B 4 5 6 F G H
MOVE
From Start
To Start
From
PAD
To
PAD
From
PAD
To
PAD
From End
MOVE
From Start
To Start
From
PAD
To
PAD
From
PAD
To
PAD
From End
■Parameter list