AW1600 Owner’s Manual
Correcting a Vocal Track (Pitch Fix)
9
Mixdown and bounce operations
90
3Move the cursor to the PITCH FIX button
and press the [ENTER] key.
A popup window will appear which allows you to
select the source edit track.
4Specify the source edit track in the TRACK
filed, then move the cursor to the OK button
and press the [ENTER] key.
A popup window will appear which allows you to
select the record destination track and the virtual track.
5Specify the record destination track in the
TRACK field and the virtual track in the V.TR
filed, then move the cursor to the OK button
and press the [ENTER] key.
This will select the PITCH FIX display.
1EXIT button
Move the cursor to the EXIT button and press
[ENTER] to exit from the PITCH FIX mode and
return to the BOUNCE page.
BBYPASS button
To monitor the vocal track prior to pitch correction,
move the cursor to this button and press [ENTER].
CFrom TR
Indicates the track to be edited (the source track). This
field is only for display, and cannot be edited.
DTo TR/V.TR
Indicates the track and virtual track to which the pro-
cessed source track will be recorded (the destination
track). This field is only for display, and cannot be
edited.
ECTRL
Selects the method of pitch correction/shift from the
three ways below.
• SCALE ........ Specify the scale via received MIDI
notes to adjust the pitch. For example,
if you play a chord on a connected
MIDI keyboard, the pitch is shifted by
the notes included in the chord.
•NOTE...........The pitch is changed according to the
received MIDI note.
•PANEL.........This lets you adjust the pitch by speci-
fying a scale from the keyboard on the
display.
FTYPE
Sets this to an appropriate value to maximize the accu-
racy of the pitch change of the original signal. Gener-
ally, this should be set to Normal; however, for low
vocals, set this to Male, and for high vocals, set it to
Female.
GDETECT
This determines the time resolution for pitch change.
The shorter the setting, the more quickly the pitch
change is recognized. The longer the setting, the more
slowly pitch changes are made, resulting in more
abrupt, step-like pitch changes.
HRATE
This determines the speed resolution for pitch change.
The faster the setting, the more quickly the pitch is
changed, increasing the apparent effectiveness of the
pitch change function. When this is set to “000,” there
is no pitch change.
IFORMANT
This determines the vocal quality (character) of the
pitch-adjusted signal. Positive (+) values result in a
higher voice quality and negative (–) values result in a
lower voice quality.
JPITCH
This determines the octave setting of the pitch-
adjusted signal. The range is from –2 to 2 octaves in
semitone steps. The integer and fraction segments of
the value are set separately.
KKeyboard
The graphic keyboard can be used to specify notes
when the CTRL parameter is set to PANEL. To turn a
note on or off, move the cursor to the desired note and
press [ENTER].
• Different tracks must be specified for the source and destina-
tion.
NOTE
J
1 D 2 EGCH F
I K
The following occur when the PITCH FIX mode is
engaged :
• No other display can be selected from the panel keys.
• Record track assignments are ignored.
• No internal effects other than Pitch fix can be accessed.
• The Tempo Map (scene numbers) is temporarily ignored.
• MIDI program and control change messages cannot be
received.
NOTE