AW1600 Owner’s Manual
Effects Parameters
192
Appendix
TREMOLOHQ.PITCH (Effect 2 only)DUAL PITCHROTARY
Parameter Range Description
FREQ. 0.05 – 40.00 Hz Modulation speed
DEPTH 0 – 100% Modulation depth
WAVE Sine, Tri, Square Modulation waveform
LSH F 21.2 – 8.00 k [Hz] Low-shelving filter frequency
LSH G –12 to +12 [dB] Low-shelving filter gain
EQ F 100 – 8.00 k [Hz] Parametric equalizer center frequency
EQ G –12 to +12 [dB] Parametric equalizer gain
EQ Q 10 – 0.10 Parametric equalizer band width
HSH F 50.0 – 16.0 k [Hz] High-shelving filter frequency
HSH G –12 to +12 [dB] High-shelving filter gain
MIX BAL. 0 – 100 [%] Mix balance of the effects and dry sounds
Parameter Range Description
PITCH –12 to +12 semitones Pitch shift
FINE –50 to +50 cents Pitch shift fine
DELAY 0.0 – 1000.0 ms Delay time
FB.GAIN –99 to +99% Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback)
MODE 1 – 10 Pitch shift precision
MIX BAL. 0 – 100 [%] Mix balance of the effects and dry sounds
Parameter Range Description
PITCH 1 –24 to +24 semitones Channel 1 pitch shift
FINE 1 –50 to +50 cents Channel 1 pitch shift fine
PAN 1 L16–1, C, R1–16 Channel 1 panpot
DELAY 1 0.0 – 1000.0 ms Channel 1 delay time
FB.G 1 –99 to +99% Channel 1 feedback gain (plus values for normal-phase feedback, minus values for reverse-phase
feedback)
LEVEL 1 –100 to +100% Channel 1 level (plus values for normal phase, minus values for reverse phase)
PITCH 2 –24 to +24 semitones Channel 2 pitch shift
FINE 2 –50 to +50 cents Channel 2 pitch shift fine
PAN 2 L16–1, C, R1–16 Channel 2 panpot
DELAY 2 0.0 – 1000.0 ms Channel 2 delay time
FB.G 2 –99 to +99% Channel 2 feedback gain (plus values for normal-phase feedback, minus values for reverse-phase
feedback)
LEVEL 2 –100 to +100% Channel 2 level (plus values for normal phase, minus values for reverse phase)
MODE 1 – 10 Pitch shift precision
MIX BAL. 0 – 100 [%] Mix balance of the effects and dry sounds
Parameter Range Description
ROTATESTOP, START Rotation stop, start
SPEED SLOW, FAST Rotation speed (see SLOW and FAST parameters)
DRIVE 0 – 100 Overdrive level
ACCEL 0 – 10 Accelation at speed changes
LOW 0 – 100 Low-frequency filter
HIGH 0 – 100 High-frequency filter
SLOW 0.05 – 10.00 Hz SLOW rotation speed
FAST 0.05 – 10.00 Hz FAST rotation speed
MIX BAL. 0 – 100 [%] Mix balance of the effects and dry sounds