Using the dynamics library
5
Track recording
53
AW1600 Owner’s Manual

The dynamics library contains dynamics settings suitable for a variety of instruments. As for the

EQ library, you can use this to apply dynamics processing to an input channel while you record,

or when you want to modify the dynamics settings after recalling an input library.

1Press and hold the [INPUT SEL] key of the
input channel for which you want to use the
dynamics library, to access the INPUT SET-
TING popup window.
2Move the cursor to the DYN button in the
screen, and press the [ENTER] key.
The dynamics library will appear.
1List
This is the library list. The line surrounded by a dotted
line in the middle of the list is the data that is selected
for loading. When you turn the [DATA/JOG] dial, the
data in the list will scroll upward or downward.
BRECALL button
Move the cursor to this button and press the [ENTER]
key to load the currently selected data.
CEXIT button
Move the cursor to this button and press the [ENTER]
key to close the popup window.
3Turn the [DATA/JOG] dial to select the
library that you want to use, and press the
[ENTER] key.
A popup window will ask you to confirm the library
recall operation.
4Move the cursor to the OK button and press
the [ENTER] key.
The selected dynamics library will be loaded.
5Move the cursor to the EXIT button and
press the [ENTER] key.
6If you want to adjust the dynamics settings,
turn the [DYN] knob of the Selected Chan-
nel section.
Turning the [DYN] knob immediately after a library
has been recalled will simultaneously adjust multiple
dynamics parameters to control the dynamics effect.
(The result will depend on the library that you select.)
Using the dynamics library
2
3
1
•You can also access the dynamics library by pressing the
[DYN] knob of the Selected Channel section. For details, refer
to “Using libraries and scene memories” (
p. 73).
HINT
• If turning the [DYN] knob does not change the tone, check
whether dynamics may have been turned off for that channel
(
p. 96).
NOTE
• If necessary, you can also make detailed adjustments to the
individual dynamics parameters. For details, refer to “Using
libraries and scene memories” (
p. 73).
HINT