AW1600 Owner’s Manual

Setting MIDI messages
14
MIDI and utility functions
160
GMIDI CH

Selects the MIDI channel that will be used to transmit and

receive MIDI messages such as program changes and con-

trol changes. This area contains the following two items.

•TX.............Selects the transmit MIDI channel, in a
range of 1–16. While MIDI messages are

being transmitted, the characters “TX” will

be highlighted.

•RX.............Selects the receive MIDI channel, in a
range of 1–16 or ALL. If you select ALL,
MIDI messages of all MIDI channels will be
received (Omni mode). While MIDI mes-

sages are being received, the characters

“RX” will be highlighted.

HPGM CHG MODE

Switches program change transmission and reception on/

off.

If program change reception is on, the AW1600 will recall

the corresponding scene when it receives a program

change at the MIDI IN or USB connector. If program

change transmission is on, the AW1600 will transmit the

corresponding program change from the MIDI OUT/

THRU or USB connector when a scene is recalled on the

AW1600.

You can select the following choices.

• OFF...........Program changes will not be transmitted or
received.
•TX.............Program changes will only be transmitted.
•RX.............Program change will only be received.
• TX-RX ....... Program changes will be transmitted and
received.
ICTRL CHG MODE

Specifies how control changes will be transmitted and

received.

If control change transmission and reception are enabled,

the corresponding control change will be transmitted

when you operate a mix parameter (fader, pan, effect send,

etc.) for track channel 1–16 on the AW1600.

When a control change is received, the corresponding mix

parameter will change.

You can select one of the following choices.

• OFF...........Control changes will not be transmitted or
received.
•1................Control changes will be transmitted and
received on MIDI channels 1–16. (MIDI
channels 1–16 will correspond to AW1600
track channels 1–16.)
•2................Control changes will be transmitted and
received only on the MIDI channel that is
selected in the MIDI CH field. (This mapping
is compatible with the other AW-series.)
•3................This is the same as 2 in that control
changes of only one MIDI channel are
received and transmitted, but the parameter
mapping differs from 2. (A single MIDI chan-
nel will correspond to AW1600 track chan-
nels 1–16.)
When CTRL CHG MODE = 1
• In the SCENE screen PC TABLE page you can specify the scene
number that will correspond to each program change number (
p. 173).
HINT
MIDI CH CC# PARAMETER
1
7
TRACK CHANNEL 1
FADER
10 PAN
91 EFF1 SEND
93 EFF2 SEND
2
7
TRACK CHANNEL 2
FADER
10 PAN
91 EFF1 SEND
93 EFF2 SEND
3
7
TRACK CHANNEL 3
FADER
10 PAN
91 EFF1 SEND
93 EFF2 SEND
4
7
TRACK CHANNEL 4
FADER
10 PAN
91 EFF1 SEND
93 EFF2 SEND
5
7
TRACK CHANNEL 5
FADER
10 PAN
91 EFF1 SEND
93 EFF2 SEND
6
7
TRACK CHANNEL 6
FADER
10 PAN
91 EFF1 SEND
93 EFF2 SEND
7
7
TRACK CHANNEL 7
FADER
10 PAN
91 EFF1 SEND
93 EFF2 SEND
8
7
TRACK CHANNEL 8
FADER
10 PAN
91 EFF1 SEND
93 EFF2 SEND
9
7
TRACK CHANNEL 9
FADER
10 PAN
91 EFF1 SEND
93 EFF2 SEND
10
7
TRACK CHANNEL 10
FADER
10 PAN
91 EFF1 SEND
93 EFF2 SEND
11
7
TRACK CHANNEL 11
FADER
10 PAN
91 EFF1 SEND
93 EFF2 SEND
12
7
TRACK CHANNEL 12
FADER
10 PAN
91 EFF1 SEND
93 EFF2 SEND
13
7
TRACK CHANNEL 13
FADER
10 PAN
91 EFF1 SEND
93 EFF2 SEND
14
7
TRACK CHANNEL 14
FADER
10 PAN
91 EFF1 SEND
93 EFF2 SEND
15
7
TRACK CHANNEL 15
FADER
10 PAN
91 EFF1 SEND
93 EFF2 SEND
16
7
TRACK CHANNEL 16
FADER
10 PAN
91 EFF1 SEND
93 EFF2 SEND
•For details on the mix parameters that correspond to each control
change, refer to the tables that follow.
• When you operate a mix parameter of track channel 9/10–15/16
on the AW1600, two types of control changes will be transmitted.
HINT