Yamaha AX-497, AX-397 Installing batteries in the remote control, Using the remote control

Models: AX-397 AX-497

1 23
Download 23 pages 24.01 Kb
Page 10
Image 10
Installing batteries in the remote control

CONTROLS AND FUNCTIONS

Installing batteries in the remote control

113Using the remote control3

2■Notes on batteries

Using the remote control

The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the front panel of this unit during operation.

1

Open the battery compartment cover.

 

 

2

Insert two supplied batteries

 

(AAA, R03, UM-4) according to the polarity

30 30

+

Approximately 6 m (19.7 ft)

markings (+ and –) on the inside of the

battery compartment.

3 Close the cover back.

Notes on batteries

Change all of the batteries if you notice the following conditions; the operation range of the remote control decreases, the indicator does not flash or its light becomes dim.

Use AAA, R03, UM-4 batteries.

Make sure that the polarities are correct. See the illustration inside the battery compartment.

Remove the batteries if the remote control is not used for an extended period of time.

Do not use old batteries together with new ones.

Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.

We strongly recommend using alkaline batteries.

If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations.

Handling the remote control

The area between the remote control and this unit must be clear of large obstacles.

Do not spill water or other liquids on the remote control.

Do not drop the remote control.

Do not leave or store the remote control in the following types of conditions:

places of high humidity, such as near a bath

places of high temperature, such as near a heater or a stove

places of extremely low temperatures

dusty places

Do not expose the remote control sensor to strong lighting, in particular, an inverter type fluorescent lamp; otherwise, the remote control may not work properly. If necessary, position this unit away from direct lighting.

6

Page 10
Image 10
Yamaha AX-497, AX-397 owner manual Installing batteries in the remote control, Using the remote control, Notes on batteries